Prevent network downtime With UPS
Power failure resulting in network downtime can cost businesses substantial sums in revenue; in addition, data lost during those power failures is often not recoverable. UPS Systems provide power protection by instantly responding to outages and can support equipment until mains power is available or a generator is active.
Ecl-ips provides a large range of UPS systems from 400VA to 1.6 MegaWatts. These systems can be designed for specific needs or provided quickly in an emergency situation. Single PCs, servers, data centres and communication rooms would benefit from rack mounted or tower UPS systems. In large data centres we can provide room based UPS systems complete with power monitoring and control. Click here for APC’s UPS Selector to help you find a customised UPS solution.
![Apc Spart Ups Products Apc Spart Ups Products](https://staging.ecl-ips.com/wp-content/uploads/2023/02/APC-Spart-UPS-products-1024x534.jpg)
The range of power problems you could face
Blackout: Also called a power outage, power cut, a power blackout, power failure is a short-term or a long term loss of the electric power to a particular area. There are many causes of power failures in an electricity network.
Brownout: This happens when there is an overload of electrical circuits. If you have a lot of electrical equipment connected and in use at the same time, this can trigger a brownout resulting in a loss of power. The issue usually lasts for a short period, but it can cause damage to your device.
Noise: Commonly caused by interference from lightning and generators; resulting in unclean power going to your devices. It can cause the operating system and applications to malfunction and possibly corrupt files.
Power Spike: A very short pulse of energy on a power line. Power spikes can contain very high voltages – up to and beyond 6000 volts – but usually last only a few milliseconds, as opposed to longer, but lower voltage power surge. Sometimes surges are preceded or followed by spikes
Power Surge: Power surges occur when the flow of electricity is interrupted, then started again, or when something sends electricity flowing back into the system. Surges can range from five or ten volts when you turn on your hair dryer to thousands of volts if lightning strikes a transformer.
The advantages of UPS systems:
- Immediately provide backup power during power failure to keep your business running
- To bridge the power gap until a standby generator is synchronised
- Protect against brownouts, power spikes, voltage dips, fluctuations and complete power failures
- Providing surge protection and ensuring you will not have a complete system shutdown
- Shut down a computer or server in an orderly manner
- Reduce downtime costs and protect critical equipment
- Protects against data loss; increasing user productivity.
- Some of the larger server manufacturers now recommend the use of a UPS as part of their warranty stipulations. Can you afford not to be protected?
![Nicky Ayers profile Nicky Ayers profile](https://staging.ecl-ips.com/wp-content/uploads/2020/05/Nicky-Ayers-profile-150x150.jpg)
We can assess your UPS System and ensure you have the right product for your business. If you would like us to advise you contact us.
UPS Monitoring and Management
We recommend wherever possible that your UPS is monitored, this can be done locally or remotely. Alerts can be sent to inform you of events or when a UPS battery change is due to help you maintain the resilience that you require. In addition to this there are also various software packages that can automatically shut down servers in the event of a power outage.
Most UPS devices have the capability to house network cards that can report on information that is relevant to the integrity of the system, such as battery condition, run-time remaining, load levels, input voltage etc. In addition to this, environmental parameters such as room temperature and humidity can also be measured and reported on.
Why do you need to monitor a UPS?
- To enable you to respond quickly if action is needed
- So you are the first to know when there is a problem
- Alerted when the battery isn’t performing at full capacity and requires maintenance
- Extend the life of the battery with temperature monitoring
- Optimise energy efficiency, reduce energy costs and ensure the best performance of your UPS
- Prevent costly IT downtime
- To know how much runtime you have in the event of power failure
![Darren Roe profile Darren Roe profile](https://staging.ecl-ips.com/wp-content/uploads/2020/05/Darren-Roe-profile-150x150.jpg)
We can protect you against power failures. If you would like us to advise you contact us.
Frequently Asked Questions
What is a UPS and how does it work?
A UPS (Uninterruptible Power Supply) is a device that can provide back up power in the event of a power cut, it sits inline between the incoming power and protected device. Generally the UPS also provides power filtering to iron out any power peaks and troughs. In the event of a power cut the UPS continues to provide power from its’ battery or battery pack in the event of a power outage.
Why do I need a UPS?
We recommend that a CCTV System has a back up power supply, more often now as CCTV Systems are IP Based this is easy to achieve with a UPS – Don’t forget that UPS devices also require monitoring and batteries generally tend to last for 5 years or so.
Why do you need to monitor a UPS?
- To enable you to respond quickly if action is needed
- So you are the first to know when there is a problem
- Alerted when the battery isn’t performing at full capacity and requires maintenance
- Extend the life of the battery with temperature monitoring
- Optimise energy efficiency, reduce energy costs and ensure the best performance of your UPS
- Prevent costly IT downtime
- To know how much runtime you have in the event of power failure
How can you monitor your UPS?
Monitoring your UPS can be done locally or remotely. If there is no permanent IT person on a site there is software that can ensure that administrators are remotely alerted, via email, to critical UPS alarms such as on-battery, replace battery, and overload. In addition, there are various software packages that can automatically shut down servers in the event of a power outage.
What are the advantages of UPS systems?
- Immediately provide backup power during power failure to keep your business running
- To bridge the power gap until a standby generator is synchronised
- Protect against brownouts, power spikes, voltage dips, fluctuations and complete power failures
- Shut down a computer or server in an orderly manner
- Reduce downtime costs and protect critical equipment
- Protects against data loss; increasing user productivity.
- Some of the larger server manufacturers now recommend the use of a UPS as part of their warranty stipulations. Can you afford not to be protected?
What UPS devices does Ecl-ips offer?
Ecl-ips has a range of APC Smart-UPS™ appliances we can supply. These are trusted by millions of IT professionals throughout the world to protect equipment in server rooms and critical data from costly interruptions by supplying network-grade power reliably and efficiently.
What UPS devices have lithium ion batteries NEW
???